Always ready to assist you

Call 855.894.3136

MultiCam Technical Support is your connection for help and advice on how best to utilize your MultiCam System.

 

Training

CAD/CAM Software Training – EnRoute Basic (Online)

Course Name: E Basic

Course Dates: Every 2nd & 4th week of the month

Hours: 9:30am – 3pm CST w/ lunch break and afternoon break

Prerequisite: Open to all. Enrollment limited to 6 students.

2-day software training course led by an experienced user that will teach CAD drawing and modification tools as well as toolpathing strategies. General course outline will cover basic CAD and toolpathing, ordering, nesting, and outputting CNC files.

Customers must have EnRoute loaded on their computer they are going to use and must have a dual monitor or dual screen setup before the class starts. After the customer finishes the class, they will be rewarded with a certificate of completion that the trainer will ask the customer to sign and be sent back for our records and the customers records. Class will be a total of 4 hours long per day.

Course Fee:

$1,500 per class (one employee), $750 per additional employee of same company

Location:
Online

CAD/CAM Software Training – EnRoute Advanced (Online)

Course Name: E Advanced

Course Dates: Scheduled upon request

Hours: 9:30am – 3pm CST w/ lunch break and afternoon break

Prerequisite: Open to all. Must complete EnRoute Basic Training Course or have basic EnRoute knowledge. Enrollment limited to 6 students.

2-day software training course led by an experienced user that will start with relief cut demonstration introduction and class drawing projects. General course outline will cover basic reliefs, mesh, textures, bitmap, masks, and toolpathing.

Customers must have EnRoute loaded on their computer they are going to use and must have a dual monitor or dual screen setup before the class starts. After the customer finishes the class, they will be rewarded with a certificate of completion that the trainer will ask the customer to sign and be sent back for our records and the customers records. Class will be a total of 4 hours long per day.

Course Fee:

$1,500 per class (one employee), $750 per additional employee of same company

Location:
Online

 

 

MultiCam Tech Training 101

Course Name: Tech 101
Hours: 9am – 4pm w/ Lunch Provided

Prerequisite: Authorized MultiCam Technicians only

5-day course that focuses on proper machine installation procedures and introductory electrical, electronic, mechanical, operational, and software fundamentals that are utilized within everyday service.

Topics to be covered:

* Operations – explanations of keypad menus, setup and common use Suite 4 applications
* Machine Install – pre-install requirements, controller cabinet electrical flow, mechanical install procedures
* Controller Basics – TCP/IP Ethernet setup, flash parameter modification, use of macros & Batman keys, loading of controller boards, and setup of
* Common option setups (as time allows) – MultiVision, knife system, & others

Location:
MultiCam Factory
1025 West Royal Lane
Dallas, Texas 75261

Applications Class

Applications Class – Available upon request

Location:
MultiCam Factory
1025 West Royal Lane
Dallas, Texas 7561

*Class must have a minimum of 2 attendees.

Stay Informed

Stay Informed

Get A Quote

Get A Quote


















Do NOT follow this link or you will be banned from the site!