Always ready to assist you

Call 855.894.3136

MultiCam Technical Support is your connection for help and advice on how best to utilize your MultiCam System.

 

CNC Waterjet

1000 Series CNC Waterjet

1000 Series CNC Waterjet – An effective and efficient water-only cutting solution

1000-series-cnc-waterjetDo you need to cut a wide variety of thin materials on a budget? MultiCam’s 1000 Series CNC Waterjet is the perfect platform for accurate and quality cuts every time! Cutting with a Waterjet is beneficial for heat-sensitive processes as it does not create any heat-affected-zones which could potentially lead to warped material.

MultiCam’s EZ Control G-Code and Coreo software ensures a simple yet effective workflow for machine novice and experienced operators alike. Combined with Coreo, an intuitive CAD/CAM software, businesses will have the ability to draw, program, and cut within the same program.

With a cut speed of 1,000 IPM and a rapid traverse of 1,200 IPM, the 1000 Series Waterjet provides quality and reliable cutting. Since the jet-stream of water is so small, the kerf (line of cut) is minimize so businesses can get the most parts out of their material to maximize production output.

With over 25 years of CNC experience in designing, manufacturing, and applications MultiCam is up to the challenge when it comes to finding a production solution for you! For more information about the 1000 Series Waterjet or any other of our CNC machinery, contact us at [email protected] or give us a call at 972.929.4070 today!

Standard Features

  • MultiCam EZ Control®, Coreo® BMO software
  • All-steel, stress- relieved, integral water tank design
  • Three-side cutting tank access
  • Integrated fork lift tubes
  • Dual-side, brushless digital AC servo drives
  • Full range of KMT intensifiers
  • (Features subject to change without notice)

Options

  • Two and three head configurations
  • Up to four pure water heads
  • CNC Computer Interface Station
  • Integrated CNC control air conditioner
  • Laser Pointer
  • MultiCam Coreo Software Packages
  • Chiller for intensifier
  • Closed-loop filtration system
  • (Options subject to change without notice)

Specifications

  • 25mm linear bearing profile rails
  • Z-axis clearance: 4.5”
  • Z-axis travel: 6”
  • Cut speed: 1,000 IPM
  • Rapid traverse speed: 1,200 IPM
  • Repeatability: +/- 0.001”
  • Drive system X and Y axis: Linear rack and pinion
  • Drive system Z axis: Lead screw
  • (Specifications subject to change without notice)

Materials Cut

  • Rubber
  • Food
  • Foam
  • Vinyl
  • Textile

Applications

  • Automotive fabrication
  • Aerospace
  • Gaskets
  • Sign making
  • Food Industry

Basic Information

  • 30 HP
  • Table sizes: 60″ x 120″ to 80″ x 144″
  • Rapid Traverse: 1,200 IPM
  • Repeatability: +/- 0.001″
 1000-waterjet-sizes10000-waterjet-width-layout10000-waterjet-height-layout10000-waterjet-length-layout

3000 Series CNC Waterjet

3000 Series CNC Waterjet – An Easy-to-Use and Affordable Cutting Solution for a Wide Variety of Materials

If you need to cut a wide variety of materials, you’re in the right place when looking at the Multicam 3000 Series CNC Waterjet. With waterjet machining, you get an impeccably accurate cut without an edge impacted by heat.

EZ Control G-Code and EZ Suite software ensures smooth and accurate operation by all your employees. Forklift tubes are built right in the 3000 Series for easy transport. Also, if you need to make a pure water cut that doesn’t require abrasive, you can make the transition fast.

You get 8 different options for customization to choose from so you can meet all your cutting applications. With a cut speed of 1,500 IPM and rapid traverse speed of 2,100 IPM the 3000 Series Waterjet works quickly enough to get your project done by your deadline, without sacrificing cut quality.

But, the real reason you’d get the 3000 Series CNC Waterjet is for its versatility in cutting applications. You can cut any material accurately, and without a heat-affected edge, ranging from steel to stone or plastic. And you can cut for any industry, starting with simple sign making and structural steel and getting as precise as aerospace.

When you get the 3000 Series CNC Waterjet, you also get MultiCam’s immaculate customer service. Call MultiCam at 972.929.4070 to get your questions answered today. You won’t face any high sales pressure. Just get the facts so you can make the best decision for your company.

Standard Features

  • MultiCam EZ Control®, EZ G-Code and EZ Suite® software
  • All-steel, stress- relieved, integral water tank design
  • Three-side cutting tank access
  • Integrated fork lift tubes
  • Heavy channel guttering for water runoff and significantly increased machine rigidity
  • Dual-side, brushless digital AC servo drives
  • Fast transition between pure water and abrasive cutting
  • Weir settling tank and sump pump
  • Integrated PC with 19” LCD monitor
  • Full range of KMT intensifiers
  • (Features subject to change without notice)

Options

  • Single or dual abrasive head assemblies
  • Up to four pure water heads
  • Pneumatic drill
  • Integrated CNC control air conditioner
  • Chiller for intensifier
  • Abrasive removal systems
  • Air ballast water-leveling system
  • Closed-loop filtration system
  • (Options subject to change without notice)

Specifications

  • 25mm linear bearing profile rails
  • Z-axis clearance: 10”
  • Z-axis travel: 8”
  • Cut speed: 1,500 IPM
  • Rapid traverse speed: 2,100 IPM
  • Repeatability: +/- 0.001”
  • Drive system X and Y axis: linear rack and pinion
  • Drive system Z axis: precision ball screw
  • (Specifications subject to change without notice)

Materials Cut

  • Steel
  • Stainless steel
  • Aluminum
  • Glass
  • Stone
  • Plastics

Applications

  • Automotive fabrication
  • Aerospace
  • Glass/ceramics
  • Construction
  • Ornamental metal
  • Structural steel
  • Sign making
  • Metal fabrication
  • HVAC

Basic Information

  • 50 HP
  • Table sizes: 60” x 60” to 80” x 144”
  • Rapid traverse: 2,100 IPM
  • Repeatability: +/- 0.001”
  • Weight: 3,900 lbs to 6,900 lbs
 
MultiCam 3000 Series CNC Waterjet Size ChartMultiCam 3000 Series CNC Waterjet Overview SchematicMultiCam 3000 CNC Waterjet Sideview Schematic

5000 SERIES CNC WATERJET

5000 SERIES CNC WATERJET– AN EASY-TO-USE 5-AXIS CUTTING SYSTEM

Our manufacturing facility utilizes laser calibration equipment, so you don’t have to second-guess the accuracy and performance of a MultiCam system. With such an advanced system, this 5000 Series CNC Waterjet is perfect for end-users requiring high-performance and precison.

Constructed of an all steel frame means that you have a solid and sturdy frame which nearly eliminates vibration. This durability helps cutting even the most intricate of parts accurate and clean.

Coupled with MultiCam’s EZ control system, this CNC Waterjet system is offered with a 60,000 or 90,000 PSI pump to help maximize your throughput and speed throughout the cutting process.

Contact our sales team at 972.929.4070  for more information or to find out what system works best for you!

Standard Features

  • All-steel-stress relieved integral water tank design
  • Three side cutting tank access
  • EZ-Control and Coreo Software
  • Digital Servo drive and brushless digital AC motors
  • Heavy channel guttering for water runoff and significantly increased machine rigidity
  • Fast transition between pure water and abrasive cutting
  • Weir settling tank and sump pump
  • Fully Integrated 5-Axis Cutting Head
  • Full range of KMT intensifiers
  • (Features subject to change without notice)

Options

  • Single or dual abrasive head assemblies
  • Up to four pure water heads
  • Pneumatic drill
  • Abrasive removal systems
  • Closed Loop filtration systems
  • (Options subject to change without notice)

Specifications

  • Z-axis clearance: 10”
  • Z-axis travel: 8”
  • Cut speed: 2100 IPM
  • Rapid traverse speed: 1500 IPM
  • Repeatability: +/- 0.001”
  • Drive system X and Y axis: linear rack and pinion
  • Drive system Z axis: precision ball screw
  • Table Sizes: 60” x 60” to 80” x 144”
  • (Specifications subject to change without notice)

Applications

  • Automotive fabrication
  • Aerospace
  • Glass/ceramics
  • Construction
  • Ornamental metal
  • Structural steel
  • Sign making
  • Metal fabrication
  • HVAC

Materials Cut

  • Steel
  • Stainless steel
  • Aluminum
  • Glass
  • Stone
  • Plastics

5000 Series Waterjet Overhead Layout

6000 Series CNC WaterJet

6000 Series CNC Waterjet – Affordable, Easy-to-Use, and Perfect for Large Format Cutting

Don’t have a large budget, but do need to make highly accurate cuts for aerospace, automotive, HVAC, marine, stone cutting, or general metal fabrication purposes?

The 6000 Series CNC Waterjet may be just the solution you’ve been looking for. It’s been specially designed to accurately cut a wide variety of materials at high speeds. And of course, since you cut with water, you get an excellent finish without an edge damaged by excessive heat.

All manufacturing’s been done with certified laser calibration equipment, so you don’t have to second-guess the precision level. That also means your customers can count on high work quality too, which means they’re happier.

Modular base rails have been made from ½” thick structural tubing. This means you have an extremely rigid cutting base, which nearly eliminates vibration and keeps your cutting quality high. The 6000 Series CNC Waterjet also runs much quieter (and especially so at higher speeds) than a rack-and-pinion system because of the Alpha gearboxes and precision manufacturing the machine frame.

The helical rack also has many more engaged teeth than your standard straight system, and that helps the CNC Waterjet accelerate faster and cut more accurately. The rapid-traverse moves so quickly that your customers will even notice if they stop by to see you working in action.

Add on top of this MultiCam’s EZ control system, which does just like it sounds, and you have a winning combination for quality, accuracy, and consistency.

Just call our sales team today at 972.929.4070 to ask all your questions to get straightforward answers, without any high sales pressure.

Standard Features

  • MultiCam EZ Control® and EZ Suite® software
  • All-steel, stress-relieved, heavy-duty construction
  • Dual-side, brushless, digital AC servo drives
  • Fully programmable retract between cuts
  • Material database
  • Integrated PC with standard Ethernet interface and 12 MB memory for unlimited file size transfers
  • Integrated polyurethane machine bellows
  • Fast transition between pure water and abrasive cutting
  • Weir settling tank and sump pump
  • Full range of KMT intensifiers
  • Tool-free, hand tightened abrasive nozzle design
  • Precision machined and stress-relieved modular base rails
  • (Features subject to change without notice)

Options

  • Single or dual abrasive head assemblies
  • Up to four pure water heads
  • Pneumatic drill
  • Chiller for intensifier
  • Abrasive removal systems
  • Closed-loop filtration system
  • Air ballast water-leveling system
  • Additional modular rail sections for long machine lengths
  • (Options subject to change without notice)

Specifications

  • 35mm linear bearing rails with stainless spring steel strip covers
  • Z-axis clearance: 10”
  • Z-axis travel: 8”
  • Cut speed: 1,500 IPM
  • Rapid traverse: 2,100 IPM
  • Repeatability: +/- 0.001”
  • Drive system X and Y axis: helical rack and pinion
  • Precision planetary gearboxes
  • Abrasive feeder/hopper system
  • (Specifications subject to change without notice)

Materials Cut

  • Steel
  • Stainless steel
  • Aluminum
  • Brass
  • Bronze
  • Copper
  • Titanium
  • Concrete/cement
  • Stone
  • Granite/marble
  • Rubber
  • Plastics

Applications

  • Aerospace machining
  • Metal fabrication
  • Stone cutting
  • Job shops
  • Automotive parts manufacturing
  • Marine fabrication
  • HVAC

Basic Information

  • Working area: 80” x 145” to 180” x 145”
  • Rapid traverse: 2,100 IPM
  • Repeatability: +/- 0.001”
MultiCam 6000 Series CNC Waterjet Size ChartMultiCam 6000 Series CNC Waterjet Overview SchematicMultiCam 6000 Series CNC Waterjet Sideview SchematicMultiCam 6000 Series CNC Waterjet Backview Schematic

V-Series CNC WaterJet

V-Series CNC WaterJet – High Performance, Versatility, and Productivity at an Affordable Price

The V-Series CNC Waterjet may be just the solution you’ve been looking for. With the V-Series, you can make pure water or abrasive cuts.

To maximize your productivity, the V-Series CNC Waterjet comes with multiple heads so you can simultaneously machine parts. And, you can accurately cut just about anything you want. Cutting applications range from steel to galvanized metal, stone, glass, and plastic. You can cut for nearly any common application, including manufacturing HVAC equipment, making signs, or making automotive parts.

A KMT Tri-Line Pump is an affordable solution that creates up to 55,000 PSI in operating pressure to make your cuts happen. Manufactured with the idea of requiring less maintenance, it’s also easily accessed when necessity dictates. The V-Series CNC Waterjet also comes with an optional closed water filtration system, abrasive removal system, or intensifier ranging in power from 30 HP to 200 HP.

When you choose the V-Series, you also get MultiCam’s reputation for amazing customer service. With more than 70 locations in our global network of experts, MultiCam is easy to access when you need help.

Call our sales team at 972.929.4070 to learn more about the V-Series CNC Waterjet and see if it is right for you. You won’t get a high-pressure sales pitch. Instead, you’ll get friendly assistance to help you make the best decision for your company.

Standard Features

  • EZ Control® and EZ G-Code®
  • 12- MB of memory with unlimited file size transfer
  • 60” x 122” steel slat bed
  • Abrasive feeder/hopper system
  • KMT Tri-Line Pump
  • 60K PSI
  • (Features subject to change without notice)

Options

  • Full range of intensifiers up to 50 HP
  • Abrasive and pure water heads
  • Multiple heads for simultaneous machining of parts
  • Closed water filtration systems
  • Abrasive removal system
  • Chillers
  • (Options subject to change without notice)

Specifications

  • Z-axis clearance: 6”
  • Z-axis travel: 6”
  • Cut speed: 600 IPM
  • Rapid traverse: 1,000 IPM
  • Repeatability: +/- 0.001”
  • Drive system X and Y axis: rack and pinion
  • Drive system Z axis: lead screw
  • (Specifications subject to change without notice)

Materials Cut

  • Steel
  • Stainless steel
  • Glass
  • Plastic
  • Aluminum
  • Stone
  • Copper
  • Expanded metal
  • Galvanized

Applications

  • Sign making
  • Stone and tile machining
  • Automotive parts fabrication
  • Small job shops and general parts fabrication
  • Foam cutting
  • Gasket manufacturing
  • HVAC

Basic Information

  • Table sizes range from 5’ x 5’ to 80″ x 120″
  • Rapid traverse: 1,000 IPM
  • Repeatability: +/- 0.001”
  • Weight: 3,700 lbs. (empty) to 11,000 lbs. (with water)
  • Work surface: steel slat
MultiCam V-Series CNC Waterjet SchematicMultiCam V-Series CNC Waterjet Overview Schematic
Stay Informed

Stay Informed

Get A Quote

Get A Quote
















Do NOT follow this link or you will be banned from the site!