 |
|
 |
|
 |
|
KMT Intensifiers for 3000 Series
- SL-V 15 HP .26 GPM Flow rate @60K PSI
- SL-V 30 HP .52 GPM Flow rate @60K PSI
- SL-V 50 HP .90 GPM Flow rate @60K PSI
- SL-V 60 HP 1.02 GPM Flow rate @60K PSI
- SL-V 75 HP 1.34 GPM Flow rate @60K PSI
- SL-V 100 HP 1.83 GPM Flow rate @60K PSI
- S-30 30 HP .52 GPM Flow rate @52K PSI
- SL-V E50 50 HP 1.00 GPM Flow rate @52K PS
The Details:
Machine
- Z-Axis Clearance 10”
- Z-Axis Travel 8”
- Resolution: .0001”
- Repeatability: +/- .001”
- Positional Displacement Accuracy: +/- .005” over 10 feet
- Rapid Traverse: 2100 IPM
- Maximum cutting speed; 1500 IPM
- Drives: Brushless digital AC servo
- Drive System X and Y-Axis: Linear Rack and Pinion
- Drive System Z-Axis: Precision Ball Screw
Controller
- Type: Stand Alone CISC/IFPU
- Interface: RS232 or Ethernet/DNC
- Memory: 8 MB
- File Size Limit: Unlimited
- File Type: M & G codes (EIA 274D), U-Cito, & HPGL
Other Options
- Single or dual abrasive head assemblies
- Up to four pure water heads
- Pneumatic drill
- Integrated CNC Control air conditioner
- Chiller for the intensifier
- Abrasive removal systems
- Air ballast water leveling system
- Closed loop filtration systems
- Advanced Graphical Interface Industrial PC Workstation
All Specificationss are subject to change.
3000 Series WaterJet
The MultiCam 3000 Series Waterjet cutting system is an affordable, easy-to-use, production cutting solution designed for manufacturers that want the ability to cut a wide variety of materials. High-pressure waterjet machining also offers unique advantages over other cutting technologies allowing the user to cut highly accurate parts with excellent finish and no heat affected edge.
All 3000 Series WaterJet machining systems are manufactured using high-tolerance, large-scale CNC metalworking machines and are verified with certified laser calibration equipment. And every MultiCam 3000 Series waterjet also comes with the full support of the MultiCam Technology Center network, with over 70 locations worldwide. MultiCam sales, service, support and training are always nearby.
Standard Features
No machine offers more standard features than the MultiCam
- All steel, stress relieved, integral water tank design
- Three (3) side cutting tank access for easy load andunload
- Integrated fork lift tubes for easy machine positioning and increased machine rigidity
- Heavy C channel guttering for water run-off and exceptional upper machine rigidity
- Moving gantry with dual side, brushless digital AC Full 360 degree bellows on all axes
- Fast switching between pure water and abrasive cutting
- Weir settling tank and sump pump
- MultiCam EZ control and EZ suite software
- Integrated PC with 19” LCD monitor
- Standard Ethernet interface with DNC file system and unlimited file size transfer capabilities
- NC Geomate software standard
- Full range of KMT intensifiers available
MultiCam EZ Control
- Handheld keypad interface allows operator to set job parameters, jog the machine, perform system tests and download jobs from a remote computer system
- Standard shape library with automatic array.
- Ethernet and serial communications interface are available to the host computer system
- Productivity Software Suite is included
- Bar-code scanning interface and 2D part digitizing are available options
NC GeoMate Waterjet Programming Software
MultiCam’s NC GeoMate software was developed specifically for CNC waterjet systems. Unlike conventional CAM programs designed for general metalworking applications, NC GeoMate is fully optimized to the demands of waterjet cutting. It
runs on the MultiCam EZ Control integrated PC so the operator can be preparing new programs while the machine is in full production.
Advanced Graphical Interface
