 |
|||
 |
|||
 |
|||
 |
|||
 |
|
|
|
XLerator Series XLS 120 11 HP ATC Spindle
- RPM: 4,200 - 24,000
- Standard Cooling: Electric Fan
- Duty Cycle: 100%
- Construction: Dual ceramic sealed bearings at both ends - Aluminum Housing
- Collet Type: ER 40
- Taper: HSK63F
- Standard Power: 220/380
HSK tool holders offer 2.5 times the holding force and greater safety then the ISO tool holders.
Colombo 7.5 hp RS90 Spindle
- RPM: 4,000 - 24,000
- Cooling: Air (Electric Fan)
- Construction: 3-Bearing Spindle
- Collet Type: ER 25
- Standard Power: 208/230 V, 3-phase
- Optional Power: 380/460 V, 3-phase
MultiCam carries spindles from top of the line manufacturers. From our years experience and testing we have found these spindles to be the best performance value for the dollar.
MultiCam Spindle Advantages
- Low, easy Maintenance - No Lubrication, the only maintenance needed is to keep the cover nut and collet clean.
- Auto Starting - The spindle is automatically started at the beginning of the file and turned off at the end.
- Digital Spindle Speed - Digital, programmable spindle speed gives real time feedback of the current spindle speed. Exact spindle speeds can be entered in the files and adjusted at the keypad in real time.
- Torque Monitoring - The current draw of the spindle is displayed on the keypad during cutting. This allows the user to monitor the cutter for wear.
- Standard Collets - All spindles use standard ER collets. ER collets are inexpensive and are readily available.
The spindle inverter drives communicate with our CNC controller via Modbus.This enables us to give instantaneous velocity commands with no accuracy deviations or analog reference drifting. In addition this advanced communication technique allows the current draw to be monitored at the user interface. This is useful for keeping track of tool wear and setting feedrates.
Spindle Options
Omlat 16 HP HSK-63F Delta 12 Spindle
- Standard RPM Range: 4,000 – 24,000
- Power: 12 kW (16 hp)
- Torque: 9.5 Nm
- Bearing Lubrication: grease
- Motor Cooling: Closed Loop liquid cooled
- Pneumatic tool clamp chuck: HSK-63f
- Tool Holder: HSK-63f
- Collet type: ER-40
HSK tool holders offer 2.5 times the holding force and greater safety then the ISO tool holders.
Umbra Eurospindle 5.5-8.5 HP HSK E32
115LC Spindle
- RPM: 4,000 - 32,000
- Optional: 4,000 - 40,000 cronidur bearings.(40,000 RPM or 8.5 HP requires liquid cooling)
- Standard Cooling: Compressed Air
- Optional Cooling: Liquid
- Duty Cycle: 90% with Compressed Air cooling and 100% with Liquid Cooling
- Construction: 4-Bearing Spindle - Machined from a solid aluminum block.
- Collet Type: ER 25
- Taper: HSK E32
- Standard Power: 220 V 1-Phase, 208/230 V, 3-Phase
- Optional Power: 380/460 V, 3-Phase
HSK tool holders offer 2.5 times the holding force and greater safety then the ISO tool holders.
Perske 4 HP VS50 Spindle
- RPM: 4,000 - 24,000
- Cooling: Electric Fan
- Construction: 2 Bearing Spindle
- Collet Type: ER 25
- Standard Power: 208/230 V, 3-Phase
- Optional Power: 380/460 V, 3-Phase
DL 90 Dyna-Loc 7.5 HP ATC Spindle
- RPM: 4,000 - 30,000
- Standard Cooling: Electric Fan
- Duty Cycle: 100%
- Construction: Dual ceramic sealed bearings at both ends - Aluminum Housing
- Collet Type: ER 40
- Taper: HSK32E or 40F
- Standard Power: 220/380 V
HSK tool holders offer 2.5 times the holding force and greater safety then the ISO tool holders.
